UpperCase Screws and FFC Removal
Prerequisite:
Keyboard Removal
1. Disconnect the touchpad cable (A), speaker cable (B) and power cable (C)
(Figure 3-7).
Figure 3-7. Base Cover Screw Removal
2. Remove the four (4) screws from the upper case (Figure 3-7).
UpperCase Screws and FFC Installation
3. Secure the four (4) screws. Refer to
4. Connect the touchpad cable, speaker cable and the power cable.
5. Install the keyboard.
ID
Red
M2.5*3.5
Call
out
3-12
A
Size
B
C
Figure 3-7.
Quantity
4
Machine Maintenance Procedures
0
0
Screw Type