Using LAN EEPROM Utility
Use EEPROM.BAT to write data to LAN EEPROM under DOS mode.
1. In DOS mode, navigate to 57780_HMA51CP folder (Figure 2-23).
Figure 2-22. Updating EEPROM
2. Run EEPROM.BAT to automatically modify data in LAN EEPROM. (Figure 2-23)
Start to program image into UTP ...
52 bytes was done.
File Name
File Size
Offset
Bytes Read
Checking selfboot file Content........:
Checking selfbootII OTP Content.......:
Comparing OTP to Q5WP2N.bin...........:
Checking Bond Id......................:
Firmware Version......................: sb2 2.05
Mac Address...........................: 00201805221F
Group A. Register Tests
A1. Indirect Register Test
Figure 2-23. Updating EEPROM
3. Reboot computer when process has completed.
2-22
C:\>57780_HMA51CP>eeprom.bat
: Q5WP2N.bin
: 96
: 0x0000
: 96
0
passed
passed
passed
passed
System Utilities