5. Insert narrow tool into hole (G) on bezel, to eject module from tray (Figure 3-17).
Figure 3-16. ODD Module
6. Press down on latch (H) to unlock bezel (F) from module (A) (Figure 3-17).
7. Remove bezel (F) from module.
Figure 3-17. ODD Module
ODD Module Installation
1. Install bezel (F) to module (Figure 3-17).
2. Install and secure bracket (E) to module with two (2) screws (D)
3. Insert module (A) into module bay
4. Install and secure screw (B) to lower cover
5. Install lower logic door.
3-18
G
A
(Figure
3-14).
(Figure
F
H
(Figure
3-15).
3-14).
Machine Maintenance Procedures
0