Know Your Tractor, Know Controls & Features, Lubricate Beam And Wedge - Boss Industrial 3PT16T21 Assembly & Operating Instructions

ASSEMBLY & SET-UP INSTRUCTIONS
KNOW YOUR TRACTOR
Refer to the Tractor Owner's manual for instructions on how to start and stop the Tractor engine, and how to set throttle
and power the hydraulics to the Splitter.
KNOW CONTROLS & FEATURES
Oil Return Hose
Oil Inlet Hose
End Plate
3-Point Hitch
Mounting Frame
Tractor Engine Controls
See the tractor Owner's Manual for the location and
function of the controls on the engine.
Control Handle
The control handle has three positions; Forward, Neutral
and Reverse. See the Operation section for instructions.
LUBRICATE BEAM AND WEDGE
Lubricate the beam area (where the splitting wedge will slide) with engine oil. Do not use grease. See FIGURE 9.
Page 16
2-blade Splitting Wedge
Log Tray
End Plate
The end plate holds the log in place while the wedge
splits the log.
Log Tray
The log tray is designed to catch the log after it is
split.
2-blade Splitting Wedge
The wedge is used to split the wood.
(FIGURE 9)
Control Handle
End Plate
Beam
Cylinder
Page 13