Samsung HG43NT678U Install Manual page 29

Hotel Option menu Item
Home Menu Display
Home
menu
Home Menu Editor
Home Menu Auto Start
REACH RF Mode
REACH Channel
Group ID
REACH
Solution
REACH Update Time
REACH Update Immediate
REACH Config Version
Room Number
• Refer to the manual of each solution for details about functions and settings of the solutions such as REACH.
• REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF cable to several hundred hospitality TVs simultaneously. The REACH functions are available only in
Standalone mode. The REACH Server is sold separately. Refer to the REACH Server manual enclosed with the
REACH Server product for more operating information.
Description
Activate Home Menu in Standalone mode for user.
• ON: Home Menu enabled.
• OFF: Home Menu disabled.
In Standalone mode, you can quickly access to various features such as Source, Media
Play etc and settings such as Picture Size, Language, etc.
Edit and manage TV functions to be used from Home Menu.
This option allows you to set Home Menu as first screen for user.
• ON: Home Menu is shown as first screen.
• OFF: Do not show Home Menu as first screen.
Turn on or off the REACH RF Mode. When set to on, the TV can operate with the
REACH Server (Modulator) through the RF cable.
This is a DTV cable channel PTC number for receiving REACH data when the REACH
RF Mode set to on. The value must be same as the value set on the REACH Server
(Modulator).
You can set the TV's group ID to manage TVs in groups on the REACH Server
(Modulator).
You can set the specific time to receive and update REACH data from the REACH
Server (Modulator). (Operates when the AC power cord is plugged in and the power
is off.)
• OFF: You can turn off the REACH Update Time function.
• 12:00 am: 12:00 am everyday
• 2:00 am: 2:00 am everyday
• 12:00 pm: 12:00 pm everyday
• 2:00 pm: 2:00 pm everyday
When set to on, the TV will receive and update REACH data from the REACH Server
(Modulator) right after the power is off. (Operates when the AC power cord is plugged
in and the power is off.)
Displays the TV configuration data version received from the REACH Server.
You can set the room number of the TV's location.
English - 29