Samsung HG43NT678U Install Manual page 28

Hotel Option menu Item
DRM Mode
DRM
PI AES Data
Self Diagnosis
for TV
Self Diagnosis for HTV
Software Update
System
Sound Bar Out
Contact Samsung
Standby LED
Boot Logo
TV Reset
BLAN Power
Description
Configures DRM support.
• OFF: Turns off DRM support.
• LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
• Pro:idiom: Select to turn on Pro:Idim CAS support only.
• LYNK DRM, PI: Select when there are S-LYNK DRM CAS and Pro:Idiom CAS
channels at the same time.
Displays the current state of Pro:Idiom AES.
This function is only available DRM Mode set to Pro:idiom or LYNK DRM, PI.
Enter Self Diagnosis Menu.
• Start Picture Test: Use this test when you experience a problem with your TV's
picture.
• Start Sound Test: Use this test when you experience a problem with your TV's
sound.
• Signal Information: Show digital broadcasting signal information.
• Reset: Restore all TV settings, to the factory defaults. (Not available)
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If
you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If PI DTV Channel Key Loss
(Pro:Idiom DTV Channel Key Loss) appears to have failed and the Pro:Idim encryption
channel has failed to play content, first check the broadcasting systems related to
Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication
with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
Lets you upgrade the TV Software with a USB flash dirve.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select
where the TV sound is outputted when the TV is turned on.
• ON: When the TV is turned on, the TV sound is automatically outputted in the
Sound Bar device only.
• OFF: When the TV is turned on, the TV sound is automatically outputted in the TV
speaker device.
Display the web site of related Samsung service center, software version, and Mac
address information.
When the TV is in standby mode, you can configure the settings of the power
indicator.
• ON: The LED is on.
• OFF: The LED is off.
To enable or disable displaying the Samsung logo when the TV turns on.
Returns all settings on the TV to their factory defaults.
BLAN Power Turns the built-in BLAN module functions on or off.
• This function is only available when Hospitality Mode is set to Interactive Mode
and SI Vendor is set to EBL.
English - 28