Replacing The Memory Module - Lenovo ThinkCentre M810z User Manual And Hardware Maintenance Manual

Replacing the memory module

Attention
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot first and then install the
other into the DIMM 2 slot.
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently
lay it down so that the screen is against the surface and the computer cover is facing up.
3
Remove the computer stand. For details, see
4
Remove the computer cover. For details, see
5
Remove the system board shield. For details, see
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Replacing the computer stand.
Removing the computer cover.
Replacing the system board shield.
52