Wifi Connection Using Wps; Types Of Logins; Router And Satellite Labels - NETGEAR Orbi RBR350 User Manual

WiFi connection using WPS

You can connect to the router's WiFi network with Wi-Fi Protected Setup (WPS) or you
can find and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Check the WPS instructions for your computer or WiFi device.
3. Press the Sync button on the router.
4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS
button or follow its instructions for WPS connections.
Your computer or mobile device connects to the WiFi network.

Types of logins

Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
• ISP login. The login that your Internet service provider (ISP) gave you logs you in to
your Internet service. Your service provider gave you this login information in a letter
or some other way. If you cannot find this login information, contact your service
provider.
• WiFi network name and network key. Your router and satellite are preset with the
same WiFi network name (SSID) and network key (password) for WiFi access. This
information is on the router label and the satellite label.
• NETGEAR account login. The free NETGEAR account that you need to register your
router and manage your subscriptions. If you do not own a NETGEAR account, you
can create one using the NETGEAR Orbi app.
• Router login. This logs you in to the router interface from a web browser as admin.

Router and satellite labels

The Orbi router and satellite labels show the router's or satellite's MAC address and
serial number. The labels also include QR codes you can scan during setup to connect
Connect to the Network and
Access the Router
Orbi WiFi 6 Dual-band Mesh System
16 User Manual