Table of Contents
Advertisement
6.
Twist each of the four screws with a screwdriver just enough to attach the heatsink to
the motherboard. When the four screws are attached, tighten them one by one in the
sequence 1, 2 then 3, 4 as shown on the heatsink to completely secure the heatsink.
•
•
1
3
4
2
7.
Reinstall the air duct. For more information, see the section Air Duct.
2-6
The heatsink screws are T30 models. A torque value of 12 inch-lbf is recommended.
When uninstalling the heatsink ensure to loosen the four screws in the sequence 3, 4
then 1, 2 as shown on the heatsink.
Chapter 2: Hardware Information
Advertisement
Chapters
Table of Contents
