Hdmi Arc (Audio Return Channel) - JVC LT-32C600 Instruction Manual

Other Information
7

HDMI ARC (Audio Return Channel)

The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices
(e.g. soundbar) through a single HDMI connection.
Make sure CEC is enabled when using
an ARC-compliant device.
HDMI-ARC Connection
To enjoy the ARC function, please ensure your ARC-compliant audio devices are connected by an HDMI cable that support the
ARC function to the HDMI 2(ARC) port of your ARC-compliant TV. When correctly set up, you can use your TV remote control to
adjust the volume output (VOL +/– and MUTE) of the connected audio device.
1. Make sure your TV and ARC-compliant device are disconnected from the
main and switched off.
2. Connect your ARC-compliant device to your TV making sure you use the
HDMI 2 (ARC) socket on the back of the TV. The plug in and switch on at
the mains.
3. Press the
SETTINGS. Press the
menu will be displayed..
4. Press the
buttons to select HDMI ARC. It may take up to 15 seconds before you
hear sound from your external speaker, this is normal.
You will now be able to use your TV remote control to adjust the volume of
your external speaker and the speaker will also switch into on/standby when
you switch your TV on and off.
52
JVC 32' LED Smart HD TV LT-32C600 Manual.indd 52 JVC 32' LED Smart HD TV LT-32C600 Manual.indd 52
LAN
VGA
SPDIF
Optic.OUT
AV IN
HOME button and then press the
to highlight SOUND and press OK. The SOUND
buttons to select SOUND OUTPUT then press the
LAN
SPDIF
Optic.OUT
External speaker e.g. Soundbar
buttons to select the
VGA
AV IN
ARC enabled devices MUST
be connected to the socket
marked HDMI 2 (ARC).
23/12/2020 14:41 23/12/2020 14:41