Connecting An Analogue Device; Channel Selection; Display Channel Information; Volume Adjustment - JVC LT-32C600 Instruction Manual

Connecting an Analogue Device

If you have connected an analogue device such as a video recorder via the
aerial socket on your TV you will have to tune it in using Analogue mode. Ensure
the device is switched on before you start the tuning process.
1. Press the HOME button, press the
2. Press to highlight INSTALLATION and press OK.
3. Press the buttons to highlight AUTOMATIC CHANNEL SCAN and press OK.
4. Press the buttons to select ANALOGUE and press OK.
5. Press the buttons to select YES then press OK. The search will
automatically start, this will not delete your Digital channels, so don't worry!
6. When the search has finished the EDIT CHANNEL LIST will appear. Your
analogue channel will be at the end of the channel list.

Channel Selection

• Press the P + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the OK button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
OR
Press the i (info) button then the
If a locked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
•
channel will then be unlocked (refer to Locking Channel for details).

Display Channel Information

• Press the INFO button to view the current channel.
Press the INFO button
•
a second time to see
information about the current
programme you're viewing.
• Press the button to see
programme information for
the next programme.
Press INFO to remove the
•
information.

Volume Adjustment

• Press the V + or – button on the remote control.
• If you wish to switch the sound off, press the
down while your TV is in mute mode. Press the VOL – button, you will see the
volume level reduce, but you won't hear anything at the moment. To listen to
your TV at the new lower level, press the
JVC 32' LED Smart HD TV LT-32C600 Manual.indd 19 JVC 32' LED Smart HD TV LT-32C600 Manual.indd 19
button to highlight SETTINGS.
buttons to highlight and select the channel.
buttons to search for a channel you wish to watch then press OK.
Current Programme Information
button. You can turn the volume
button again or VOL + button.
Initial Setup
Next Programme Information
3
19
23/12/2020 14:41 23/12/2020 14:41