Advanced - Acer Aspire 2010 Service Manual

Advanced

The Advanced screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
FIR Ports
Configure the system's infrared port using options: Disabled and Enabled.
Insyde Software SCU
Main
Infrared Ports(FIR)
Parallel Port(LPT)
Legacy USB support
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
FIR I/O Settings
DMA Setting for Fast
IR
Mode Setting
Chapter 2
Advanced Security
---------------------------------FIR Ports--------------------------------
-----FIR I/O settings---
( ) Disabled
( ) COM1,3F8,IRQ4
( ) COM2,2F8,IRQ3
( ) COM3,3E8,IRQ4
( ) COM4,2E8,IRQ3
Description
Sets the base I/O address and IRQ for
Infrared port.
Sets a DMA channel for the printer to
operate in ECP mode. This parameter is
enabled only if Mode is set to ECP.
May 20, 2003 5:40:09
Boot
--DMA Setting For Fast IR--
( ) DMA1
( ) DMA2
( ) DMA3
OK Cancel
Exit
-Mode Setting for IRDA-
( ) Normal (16550)
( ) IrDA (HPSIR)
( ) ASK IR
( ) FAST IR
Option
COM1, 3F8, IRQ4/ COM2,
2F8, IRQ3/ COM3, 3E8,
IRQ4/ COM4, 2E8, IRQ3
DMA1, DMA2, DMA3,
Normak (16550), IrDA
(HPSIR), ASK IR, FAST IR
48