Table of Contents
Advertisement
Mounting the Wheel
Assemblies
1.
Mount a wheel assembly to each axle hub with
4 lug nuts
(Figure
(108 N∙m).
2.
Adjust the tire pressure to 5 psi (34 kPa).
1. Axle
Important:
Higher tire pressure may
damage the machine.
5). Tighten the nuts to 80 ft-lb
Figure 5
2. Wheel assembly
Mounting/Adjusting the
Hitch Straps
The hitch straps are shipped mounted in the standard
position
(Figure
Important:
The trailer tongue must be parallel to
the ground when it is aligned with the tow vehicle
hitch.
g014665
Using 1 of the configurations shown in
Figure
8, adjust and secure the hitch straps to the
trailer tongue.
4
6).
Figure 6
Standard position
Figure 7
Low hitch position
g014666
Figure 7
or
g014667
Advertisement
Table of Contents
