LG WTG9530S Owner's Manual page 33

Screw Type
Push the water supply hose up so that the rubber
Attach the water supply hose to the tap.
washer within the hose is properly seated to the tap.
Connect the water supply hose to the tap and then
2
Connect the water supply hose to the tap.
tighten it by screwing it to the right.
Securely Hand tighten only. Do not use any
mechanical device to tighten the hose connector.
After connecting the hose to both the tap and the
3
Check for water leakage.
machine, open the tap to check for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to the inlet valve
of the washing machine, and then turn the hose
connector to the right until secure. Do not use any
mechanical device to tighten. Hand tighten only.
• Make sure there is a rubber washer in both
connectors before connecting
Water tap
Water tap
Water tap
Rubber Packing
Water Supply Hose
Rubber Packing
Water tap
Water Supply Hose
Rubber Packing
Water tap
Water Supply Hose
Rubber Packing
Water Supply Hose
Hose connector
Hose connector
Hose connector
Rubber seal
Rubber seal
Hose connector
Rubber seal
Hose connector
Rubber seal
Rubber Packing
Water Supply Hose
Rubber seal