Table of Contents
Advertisement
14. Connect the touchpad cable to the main board.
Installing the Processor
1.
Lift up the CPU lever, then place the CPU back to the CPU socket carefully. Please remember to press the
CPU lever after you put the CPU back to the socket.
Installing the Thermal Module
1.
See "Installing the Speaker Set" on page 68.
2.
See "Installing the DC Board" on page 68.
3.
See "Installing the PCMCIA Slot" on page 68.
4.
See "Installing the Main Board" on page 68.
5.
See "Installing the HDD Bracket" on page 69.
6.
See "Installing the ODD Module" on page 69.
7.
See "Installing the CPU Heatsink Plate" on page 70.
8.
See "Installing the VGA Heatsink Plate" on page 70.
9.
See "Installing the Floppy Disk Drive Module" on page 71.
10. See "Installing the Touchpad Cable" on page 71.
11. See "Installing the Touchpad Board" on page 71.
12. See "Installing the Upper Case Assemly" on page 72.
73
Chapter 3
Hide quick links:
Advertisement
Table of Contents
