Table of Contents
Advertisement
Disassembling the LCD Module
Removing the LCD Bezel
1.
See "Removing the Battery" on page 46..
2.
See "Removing the Middle Cover" on page 50..
3.
See "Removing the Launch Board" on page 50..
4.
See "Removing the LCD Module" on page 51..
5.
Use plastic tweezers to remove the four screw pads, and then remove the four screws that fasten the LCD
bezel.
6.
Snap off the bezel carefully, and then remove the LCD bezel from the LCD module.
Removing the Inverter Board (15" LCD)
1.
See "Removing the Battery" on page 46..
2.
See "Removing the Middle Cover" on page 50..
3.
See "Removing the Launch Board" on page 50..
4.
See "Removing the LCD Module" on page 51..
5.
See "Removing the LCD Bezel" on page 53..
6.
To remove the inverter board, first remove one screw from the inverter board.
7.
Disconnect the LCD power cable then disconnect the inverter cable from the inverter board.
53
Chapter 3
Hide quick links:
Advertisement
Table of Contents
