Date & Time Set Procedure; Using The Arm Cuff - ReliOn WMTBPA-845 Manual

DATE & TIME SET PROCEDURE
1. To adjust the date and time, press the DATE/TIME SET
button ( ).
2. The display will show a blinking number showing the
MONTH. Change the MONTH by pressing the + button.
Each press will increase the number by one in a cycling
manner. Press the DATE/TIME SET button (
to confirm the entry, and the screen will show a blinking
number representing the DAY.
3. Change the DAY, HOUR and MINUTE as described in
Step 2 above, using the + button to change the numbers
and the DATE/TIME SET button (
entries.
repeat process to set
DAY, HOUR and MINUTE
) again
) to confirm the
Press the button
blinking MONTH
increasing MONTH
confirm the entry
13

USING THE ARM CUFF

Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9"–13" (23 cm – 33 cm)
Large Size Fits 13"–17" (33 cm – 43 cm)
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as
shown below.
Colored Arrow
Center tube over
middle of arm
Solid Colored Line
14