Table of Contents
Advertisement
Switching zones off
A combination of cooling/freezing zones can be disabled
as required. The button combination should be applied for
greater than 5 seconds.
Fig. 3.5 Fridge compartment will switch off.
mode
cooler
NOTE: Disable screen safe mode.
Fig. 3.6
Fridge compartment and Zone 2 will switch off.
mode
cooler
NOTE: Disable screen safe mode.
Fig. 3.7
Zone 1 freezer will switch off.
03
mode
cooler
NOTE: Disable screen safe mode.
Switching zones on
Each disabled zones can be reinstated by repeating the
process as described above.
°c
°c
-23
-23
q drink
s.saver
zone 1
zone 2
°c
-23
q drink
s.saver
zone 1
zone 2
°c
°c
-23
q drink
s.saver
zone 1
zone 2
Night sensor
This night sensor function saves energy by switching
the lights inside the refrigerator off if there is sufficient
illumination in the room. To activate follow Step 1 and Step 2.
Step 1. Press and hold the mode and s.saver for 3 seconds.
mode
cooler
NOTE: Disable screen safe mode.
Step 2. The night sensor indicator will appear.
mode
cooler
Turn of Night Sensor
Repeat operation as above.
SCREEN SAVER (s.saver)
This mode saves energy by switching off all control panel
lighting when the panel is left inactive. Once activiated the
screensaver mode will switch on after 10 seconds. When the
screensaver is active, only the s.saver icon is illuminated.
To activate (Fig. 3.8) the screensaver, press and hold the
's.saver' button for 3 seconds. A single beep will advise the
user that the function is set.
To deactivate (Fig. 3.8) the screensaver, press and hold the
's.saver' button for 3 seconds. A single beep will advise the
user that the function is set.
NOTE: Screensaver function is cancelled if the power is cycled
off, on.
Fig. 3.8
mode
cooler
NOTE: Disable screen safe mode.
14
°c
°c
°c
88
-88
-88
q drink
s.saver
zone 1
zone 2
°c
°c
°c
88
-88
-88
q drink
s.saver
zone 1
zone 2
°c
°c
°c
02
-22
-22
Hold for 3
seconds
q drink
s.saver
zone 1
zone 2
Hold for 3
seconds
Advertisement
Table of Contents
