Preparation - Defy DTL148 Instruction Manual

Ensure that the power plug and
power cord are properly
connected.
Never touch the plug with wet

hands!
Never unplug by pulling on the

cable, always pull out by
grabbing the plug.
Do not operate a damaged

washing machine. Contact the
customer care line on 086 100
3339 should you have any
concerns.
If the power cable is damaged,

it must be replaced by the
manufacturer, after sales
service or a similarly qualified
person.
Never plug the washing

machine into the wall socket
during installation. Death or
serious injury may result.
For safety reasons, the wall

socket and the plug should be
accessible after installation.
Do not make connections via

extension cables or multi-plugs.
Pull out the plug from the wall

socket if the machine is not
going to be used.
Figures in this manual are
schematic and may not
match your machine
exactly.
Page 6

Preparation

Review information in the user manual and
ensure that the electricity, water supply and
water drainage systems are appropriate. If
they are not, call a qualified technician and
plumber to have any necessary
arrangements carried out.
Preparation of location, electrical, tap
water and waste water installations of
the machine are the customer's
responsibility.
Warning: Prior to installation, visually
check if the machine has any defects
on it. If so, do not install it. A damaged
machine is a safety risk.
Ensure that the water inlet, discharge
hoses and power cable are not folded,
pinched or crushed, during or after
installation or cleaning procedures.
Remove package
Remove package and take out the bottom

board of the cabinet on the foam cover.
Open the washer door lid and take out the

accessories.
Never perform a trial operation or run the

washing machine on the foamed cushion
as this is extremely dangerous.
Before moving the machine, take note of
figure A on how to carry the machine.
Figure A