Remote Control Unit - Sharp AQUOS LC-32LE185M Operation Manual

Connecting external devices (Continued)
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certifi ed cable (commercially available)
DVD player/Digital TV
STB (Set Top Box)
Connecting a PC
You can use the INPUT 1 (HDMI) terminal when connecting to a PC.
PC
Connecting a USB device
Connect a USB device to the TV.
CAUTION
• Do not disconnect a USB device from the TV while transferring fi les, when a screen is in "USB" mode.
• The illustrations used throughout this manual are based on LC-32LE185M.

Remote control unit

1
2 TIMER
PHOTO
3
4
5
6
7
8
9
COLOUR
ADJ.
10
R G Y
TV
GB217WJSA
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 7.)
2 DISPLAY
Display the channel or input information.
3 TIMER
Set the Sleep timer and Reminder. (See page 12.)
4 0 – 9
Set the channel.
5 A (Flashback)
Press A to return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 8.)
Inserting the batteries
Before using the TV for the fi rst time, insert two "AAA" size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new "AAA" size batteries.
1
Open the battery cover.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.
5 6
7 VOL k /VOL l
Set the volume.
11 (VOLk) Increase the volume.
(VOLl) Decrease the volume.
12
8 e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV
13
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
14
15
9 a /b/ c / d (Cursor)
16
Select a desired item on the setting screen.
ENTER
Execute a command.
17
10 COLOUR ADJ.
18
B
Adjust the colour tone of the image on screen. (See page 12.)
11 SUPER ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
12 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
13 INPUT (INPUT SOURCE)
Select an input source.
s
14 CHr/CH
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CH s ) Decrease the channel number.
15 MPX
Select the sound multiplex mode.
16 MENU
Display the menu screen.
17 RETURN
MENU mode: Return to the previous menu screen.
18 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
2
Insert the two supplied "AAA" size
batteries.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
3
Close the battery cover.