Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble- free operation of your product, please read the Important Safety Precautions carefully before using this product. Contents...
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets. • The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE355M)/2,073,600 (only for LC-40LE355M) pixels , giving you fi ne picture details.
Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. Confi...
Page 6
Connecting external devices (Continued) Connecting a VCR, game console or camcorder A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the INPUT 4 or INPUT 5 terminals. When using component cable (commercially available) When using composite cable (commercially available) VCR/Game VCR/Game console/...
Remote control unit VOL k /VOL l Set the volume. (VOL k ) Increase the volume. CLEAR PIC. (VOL l ) Decrease the volume. e (Mute) Press e s Mutes sound. Press e again s Restores sound. Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically.
“Audio select” menu. (See page 10.) • The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The illustration used throughout this manual are based on LC-32LE355M. Turning the TV on/off...
Programme setup Initial auto installation When the TV powers on for the first time after purchase, the H Auto installation initial auto installation wizard appears. Follow the menus and You can run auto installation again, even after setting up the make the necessary settings one after another.
Programme setup (Continued) NOTE • You can also select an item by pressing CLEAR PIC. on the remote control unit. NOTE • This Clear picture processing effect may not have suitable effect on certain pictures. In that case, please change the setting to “Middle” •...
H No operation off Picture menu (Continued) You can set the TV to automatically power off when no TV operation is performed for more than 3 hours. NOTE (30 min., 3 hr., Disable) • You can also select an item by pressing WIDE on the remote control •...
Setup menu (Continued) Option menu H Audio return channel H Output volume select If this function is set to “Auto”, the TV can send audio data Allows you to select what controls the audio output. for video content shown on the TV to a connected audio Selected item Description device with just one ARC-compatible cable.
Adjusting the PC image manually Option menu (Continued) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, H Speaker selection however, manual adjustment is needed to optimise the image. You can choose to listen to the external amplifi er audio only. (On, O ) Selected item Description...
Teletext function ECO mode This function enables you to reduce the backlight brightness What is Teletext? in order to decrease the power consumption and increase Teletext broadcasts pages of information and entertainment the backlight life span as shown in the following table. to specially equipped television sets.
PC Control of the TV Communication procedure • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. Send the control commands from the PC via the The input signal (PC/video) can be selected, the volume can be RS-232C connector.
RS-232C commands list Commands • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER OFF W I D E 0 _ _ _ TOGGLE (AV) POWER SETTING P O W R 0 _ _ _ (STANDBY) NORMAL (AV)/4:3 W I D E 1 _ _ _...
You can select the duration for each photo to display, and also USB Media Player the duration for the slideshow to play. Selecting modes Duration for photos to display 3 seconds 5 seconds 10 seconds 1 minute Duration for slideshow to play 1 hour 3 hour Continuous...
Page 18
USB Media Player (Continued) Control panel for photo/music/movie mode operations • Press B to display the control panel below. Button/menu Description Photo Music Movie When selecting a folder icon: Enter this directory. ENTER When selecting a thumbnail: Play the selected fi le. Play/Pause.
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 6.) If the indicator on the TV lights up red, press POWER.
0°C — 40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 22
Được in tại Malaysia Printed in Malaysia TINS-F819WJZZ 13P06-MA-NP...