Related Manuals for WAREMA 3.16/25.04
Summary of Contents for WAREMA 3.16/25.04
- Page 1 WAREMA venetian blind Type 3.16/25.04 model 2016 Operating and maintenance instructions To be handed over to the operator. Keep for future use. Valid from 25 January 2016 Document number 2015155 [Rev. 1 - en]...
-
Page 2: Table Of Contents
Table of contents Table of contents Introduction........................3 Information on safety............................ 3 Information on the target group and application of these instructions............3 Explanation of the signal words........................3 Basic safety instructions..........................3 Product information......................4 Intended use..............................4 Parts description............................4 Operation.......................... -
Page 3: Introduction
Do not tie cords together. Make sure cords do not twist operation, care and maintenance of this item. They and create a loop. describe how to operate products with WAREMA standard drives. Other drives and special solutions are not dealt with. Pull cords/chains/belts/cords must be attached high enough that there is a clearance of 1,500 mm below... -
Page 4: Product Information
Top rail with cover Slat Fixed tension systems panel Ball chain Fig. 1: Parts overview of venetian blind 3.16/25.04 Operation NOTICE Product damage from forceful operation! When operating the product, excessive force must not be applied to the operating element if a resistance is encountered. -
Page 5: Maintenance
Maintenance NOTICE Maintenance Product damage from carelessness during operation! Proper and regular cleaning and maintenance and the use of original spare parts only are essential for fault-free The ball chain has no limit stop. operation and a long service life. Stop the movement of the chain if the product is lowered to the order height. -
Page 6: Maintenance
Subject to the statutory period of limitation for warranty claims. This requires regular maintenance. The warranty The WAREMA warranty becomes invalid if the unit is does not include wear parts or optical changes in line not maintained properly at least once a year. -
Page 7: Dismantling
Have the units dismantled by a qualified specialist. Dismantling of the product must be undertaken by a qualified specialist. Ask WAREMA for any missing documents before commencing maintenance. Disposal Should the product no longer be required, ensure that it is disposed of correctly in accordance with the relevant regulations. - Page 8 WAREMA Renkhoff SE - Hans-Wilhelm-Renkhoff-Straße 2 - 97828 Marktheidenfeld - Germany www.warema.com - info@warema.com...