Omega Mugello 2525 User Manual page 34

CONTINUING TO USE THE PRODUCT
IN THE ANTI-FREEZE MODE EVEN
WHEN TEMPERATURES HAVE RISEN
AND RETURNED TO NORMAL, MAY
RESULT IN THE ENGINE FAILING TO
START PROPERLY OR IN THE ENGINE
FAILING TO START PROPERLY OR IN THE ENGINE
FAILING TO OPERATE AT ITS NORMAL SPEED, AND
FOR THIS REASON YOU SHOULD ALWAYS BE SURE
TO RETURN THE UNIT TO THE NORMAL OPERATING
MODE IF THERE IS NO DAMAGE OF ICING OCURRING.
HOW TO SWITCH BETWEEN OPERATING MODES
1. Flip the engine switch to turn off the engine.
2. Remove the cover to the air filter, remove the air filter, and then
remove the choke knob from the cylinder cover.
3. Loosen the screws holding the cylinder cover in place( i.e., the
three screws on the inside and the one screw on the outside of the
cover), and then remove the cylinder cover.
4. Press with your finger down on the icing cap located on the
right-hand side of the cylinder cover to remove the icing cap.
5. Adjust the icing cap so that the "snow" mark faces upwards and
then return it to its original position in the cylinder cover.
6. Fix the cylinder cover back into its original position, and then fix
all other parts back into their proper positions.
12 12
EN