Factory Default - Miele G6620SC Operating Instructions Manual

Factory default

If you have altered any settings from the
factory default, you can re-set them
back to the factory default settings.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the Start button in and whilst
holding it in switch the dishwasher
on using the  button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
 Press the  button 19 times.
The  indicator will flash once slowly
and then rapidly nine times at intervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
–  : All settings are set to factory de-
fault settings.
–  : At least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the Start but-
ton.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
57