Hertz Limiter - ViewSonic XG270Q User Manual

Hertz Limiter

A monitor hertz controller allows users to control how many frames the monitor
can output. The monitor will put a cap on the maximum amount of frames that can
be rendered from the monitor to save power and loading from the monitor's side.
To adjust the Hertz Limiter:
1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen
Display (OSD) Menu.
2. Move the joy key [◄] or [►] to select Display. Then move the joy key [▼] to
enter the Display menu.
3. Move the joy key [▲] or [▼] to select Hertz Limiter. Then move the joy key [►]
to confirm the selection.
4. Move the joy key [▲] or [▼] to select your preferred frame output. Then press
the [●] key to confirm the selection.
NOTE:
• If Adaptive Sync is "On", Hertz Limiter will be disabled.
• ViewScale may not support all Hz levels.
Menu Options
Native
60Hz
100Hz
144Hz
165Hz
51