ViewSonic XG270Q User Manual page 47

Menu Option
Language Select
Information
Quick Access
Crosshair
Elite RGB
Resolution Notice Enable this option to allow the system to inform users that
Boot Up Screen
Description
Select an available language for the OSD Menu.
Display the monitor information.
Select which options to have present in the Quick Access
Menu.
Aim more clearly and quickly during FPS games with the
on-screen overlay. For more, see page 58.
This setting controls the RGB lighting on the back of the
monitor and under the bezel in order to enhance your RGB
experience. When switched on, or after being reset, the
default 'Breathing' will activate.
In addition, the RGB lights are also synced with several
key partners. Downloading their software will give you the
power to manipulate your RGB capabilities even further.
If you would like to leverage partnered software see the
advanced setup below.
Partner Software RGB Setup
• Visit https://www.viewsonic.com/elite/rgb/ and choose
a partner RGB software to download.
• Download and install your software of choice.
• Included with your monitor is a USB 3.0 A-Male to
B-Male cable. Plug in the USB 3.0 B-Male connector to
your monitor and the USB 3.0 A-Male connector to your
PC.
• Run the partner software and start customizing your
RGB lighting!
You can also check out our RGB software setup tutorials
online at https://www.viewsonic.com/elite/rgb/.
*Mode variations, customization features and any other
features or uses shall be based on and subject to the
terms of use, end user license agreement and the software
capabilities as specified or provided in partners' software.
the current viewing resolution is not the correct native
resolution.
Toggle the start screen On or Off.
47