Zanussi ZDI22003XA User Manual page 9

ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase. Fill the rinse aid dispenser when the lens (A) is clear.
DAILY USE
1. Open the water tap.
2. Set the correct programme for the type of load
and the degree of soil.
Make sure that the appliance is in Programme
selection mode.
• If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
• Do not fill the salt container and the rinse aid dispenser.
• Set the rinse aid dispenser to the lowest position.
STARTING A PROGRAMME
1. Open the water tap and close the appliance
door.
1
2
1
2
1
2
A
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
A
B
2. Turn the programme knob clockwise or
counterclockwise to select a programme.
3. Set applicable options (if available).
9