Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDI 6764
Summary of Contents for Zanussi ZDI 6764
- Page 1 GESCHIRRSPÜLER DISHWASHER ZDI 6764 Bedienungsanleitung Instruction book...
-
Page 2: Table Of Contents
Contents Safety instructions Installation instructions Building-in Disposal Levelling Fixing to adjacent units Economical and ecological dishwashing Water supply connections Description of the appliance Water inlet hose with safety valve Water outlet hose connection The control panel Electrical connection Prior to using for the first time Hints for test centres Setting the water softener Filling with salt... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be Under no circumstances should you attempt to repair the retained with the appliance for future reference. Should machine yourself. Repairs carried out by inexperienced the appliance be sold or transferred to another owner, or persons may cause injury or serious malfunctioning. -
Page 4: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN143 The control panel Function push buttons:... -
Page 5: Audible Signals
Indicator lights: Audible signals have the following meanings: Audible signals have been introduced to help indicate which salt refilling indicator light, illuminates when the salt operations the dishwasher is performing: has run out "End of programme" rinse aid refilling indicator light, illuminates when "Something not working with the machine"... -
Page 6: Prior To Using For The First Time
Prior to using for the first time Before using your dishwasher for the first time: Setting electronically 1. Ensure that the electrical and water connections comply (The dishwasher must be switched off) with the installation instructions The dishwasher is factory set at level 5. If it’s necessary to set 2. -
Page 7: Filling With Salt
Filling with salt Rinse aid Rinse aid is automatically added during the last rinse, ensuring Special salt can be added in one of two ways: thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 If you are using dishwasher detergent that already contains ml of rinse aid, which is sufficient for 16 - 40 dishwashing salt, the detergent including the salt is placed in the... -
Page 8: Filling With Rinse Aid
Filling with rinse aid Deactivation/activation of the inflow of (Rinse aid dispenser type B) rinse aid (The dishwasher must be switched off) 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The When the inflow of rinse aid has been deactivated, also maximum level for filling is indicated by "max". -
Page 9: In Daily Use
In daily use Check if it’s necessary to refill with special salt or rinse aid When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the Load cutlery and dishes into the dishwasher. spray arms . -
Page 10: The Upper Basket
Cutlery should be placed in the removable cutlery basket with Adjusting the height of the upper basket the handles facing downwards. If the handles protrude from If washing very large plates you can load them in the lower the bottom of the basket, obstructing the lower spray arm, load basket after moving the upper basket to the higher position. -
Page 11: Use Of Detergent
Use of detergent Use of "3 in 1" combi detergent tablets Only use detergents specifically designed for use in General advice dishwashers. These products are tablets with combined detergent/rinse-aid Using no more then the correct amount of detergent and salt functions. contributes to reducing pollution. -
Page 12: Washing Programmes
Washing programmes Programme Degree of soil Cycle (3) Consumption values description Programme duration Energy Water type of load (in minutes) consumption consumption (in kWh) (in litres) Any. 1 cold rinse (to avoid Partial load (to be food scraps from sticking Rinse and Hold together) completed later in the day). -
Page 13: Starting A Washing Programme
Starting a washing programme 1. Check that the baskets have been To change a washing programme loaded correctly and that the spray If you want to change the washing programme within the 3 seconds before the start of the programme, arms can rotate freely simply press the programme selection push buttons until the number of the new programme appears in... -
Page 14: End Of The Washing Programme
To change a programme after the start of the "delay start" If you want to change the selected washing programme after the start of the delay start you have to reset the dishwasher by cancelling the previous setting (also the setting of the delay start will be lost). -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel To ensure a correct with a damp soft cloth. If necessary use only neutral working of the dishwasher, detergents. Never use abrasive products, scouring pads or NEVER try to remove the solvent (acetone, trichloroethylene etc..). -
Page 16: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The intervention of an alarm is indicated by a combination of flashing indicator lights, audible signals (see following chart) and a fault code visible in the digital display. -
Page 17: Service And Spare Parts
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 18: Installation Instructions
Installation instructions Any electrical and/or plumbing work required to install Do not use, for connection, old hoses which have been this appliance should be carried out by a qualified used in another appliance. electrician and/or plumber or competent person. If the machine is connected to new pipes or pipes which have Remove all packaging before positioning the machine. -
Page 19: Water Outlet Hose Connection
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door on the right. 1. -
Page 20: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"... - Page 21 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.