Lennox LI012CO-230P432 Service Manual page 99

Steps
Remove the screws connecting the outer case with
motor support, isolation plate and chassis; lift the
outer case upwards; loosen the clasps of outer
case with right side plate and left side plate, and
then remove the outer case.
3. Remove right&left side plate
a
Remove the screws connecting the right side plate
with electric box assy, valve support, chassis and
condenser side plate, and then remove the right
side plate.
b Remove the screws connecting the
with chassis, and then remove the
96
Procedure
left side plate
left side plate.
left side plate
outer case
Service Manual
right side plate
Installation and Maintenance