12K
NOTE:Take heat pump for example.
Steps
1.Remove cable cross plate sub-assy
and valve cover
Remove the screws fixing cable cross plate
sub-assy and then remove the cable cross plate
sub-assy.
Remove the screws fixing valve cover and then
remove the valve cover.
2.Remove top cover
Remove connection screws connecting the
top cover plate with the front panel and the
right side plate,and then remove the top
cover.
3.Remove front grille
Remove connection screws between the
front grille and the front panel. Then remove
the front grille.
106
Procedure
front grille
Service Manual
cable cross plate
sub-assy
valve cover
top cover
Installation and Maintenance