EMKO RS Pro EZM Series Instruction Manual page 31

Output
Output
When count value reaches the Set Value, Output Position is changed. Actual value
is reset automatically. While Start input is active, then counting starts upcounting
from 0 value. If Output Pulse time is not 0, then Output Position is changed at the end
of the Pulse time.
If Output Pulse time is "0", then Output Position has not changed until Manuel Reset
happens.
When Manual Reset happens, count value becomes 0 value.
Output
When count value reaches the 0 Value, Output Position is changed. Actual value is
reset automatically. If Start input is active, then counting starts downcounting at Set
value. If Output Pulse time is not 0, then Output Position is changed at the end of the
Pulse time. If Pulse time is "0", then Output Position has not changed until Manuel
Reset happens.
When Manual Reset happens count value becomes SET value.
If output functions parameter
i
,
for realizing Automatic Reset.
Automatic Reset-1
Counting direction : 0 --> P (Upcounting)
Start
Reset
Set
0
Counting direction : P --> 0 (Downcounting)
Start
Reset
Set
0
Output
or
is selected Automatic Reset (
, then must be different from zero
=
=
=
=
=
=
31