Replacing Bulbs - Volvo 2010 V70 Owner's Manual

Hide thumbs Also See for 2010 V70:
Table of Contents

Advertisement

06 Maintenance and specifications

Replacing bulbs

Introduction
All bulb specifications are listed on page 228.
The following bulbs should only be replaced by
a trained and qualified Volvo service techni-
cian:
Dome lighting
Reading lights
Glove compartment lighting
Turn signals in the door mirror
Approach lighting in the door mirror
Brake/fog/taillights
Rear side parking lights
Active Bending Lights and LED bulbs
NOTE
For information regarding any other bulbs
not mentioned in this section, please con-
06
tact your Volvo retailer or a trained and
authorized Volvo service technician.
*
222
Option/accessory, for more information, see Introduction.
WARNING
Active Bending Lights* – due to the high
voltage used by these headlights, these
bulbs should only be replaced by a
trained and qualified Volvo service tech-
nician.
Turn off the lights and remove the
remote key from the ignition before
changing any bulbs.
Headlight housing
WARNING
The engine should not be running when
changing bulbs.
When changing in the headlight hous-
ing, if the engine has been running just
prior to replacing bulbs, please be
aware that components in the engine
compartment will be hot.
The entire headlight housing must be lifted out
when replacing all front bulbs (except for the
fog lights).
CAUTION
Never touch the glass of bulbs with your fin-
gers. Grease and oils from your fingers
vaporize in the heat and will leave a deposit
on the reflector, which will damage it.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 xc70Xc70V70

Table of Contents