Power Test - CyberData 011527 Quick Start Manual

3.0 Power Test

2.1. Plug in the CyberData device and monitor the front panel LED activity. See
the following figure:
Front Panel View for Button LED
Button
2.2. The Button LED will enter a fade pattern until it joins a network, at which
point it will be solid on. If the Button LED is inactive, then that suggests a
power problem.
2.3. For the battery circuit, connect the provided shunt across the BAT jumper
connections as shown in the following figure.
This concludes the power test. Go to
Network".
Quick Start Guide
Button LED
Back Side View for Power Connection
J3 = Auxiliary Power Input
+
J3
J1 = Micro-USB Power Connection
Section 4.0, "Connecting to the
J1
931787B