D-Link DPE-101GI Quick Installation Manual page 3

Step 1: Connect the Power Adapter to the power receptor on the
DPE-101GI. Connect the Power Cord to the Power Adapter and
then plug the power cord to a power outlet or surge protector.
Power Cord
Step 2: Connect an Ethernet cable into the Data In port on the DPE-101GI
and the other end into an Ethernet device.
Step 3: Connect an Ethernet cable into the Power + Data Out port on the
DPE-101GI and the other end into a powered (PoE) device.
Step 4: Installation is complete.
Computer
Switch
Router
D-Link DPE-101GI Quick Install Guide
Installation
Data in
OR
Power Adapter
Power +
data out
OR
PoE Access Point
PoE Device
PoE IP Camera
3