To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control - Subaru 2009 Tribeca Owner's Manual

vehicle reaches the desired speed.
3. Push the control lever downward in the
"SET/COAST" direction and release it.
Then release the accelerator pedal.
At this time, the cruise control set indicator
light is illuminated on the combination
meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
There are three ways to cancel the cruise
control temporarily:
Pull the control lever toward you.
Depress the brake pedal.
Shift the selector lever into the "N"
Starting and operating
position.
The cruise control set indicator light on the
combination meter turns off when the
cruise control is canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, push the control lever
upward in the "RES/ACC" direction to
return to the original cruising speed auto-
matically.
The cruise control set indicator light on the
combination meter will automatically illu-
minate at this time.
& To turn off the cruise control
There are two ways to turn off the cruise
control:
Push the main switch again.
Turn the ignition switch to the "Acc" or
"LOCK" position (but only when the
vehicle is completely stopped).
– CONTINUED –
7-31