Remote Keyless Entry System - Subaru 2009 Tribeca Owner's Manual

2-8
Keys and doors

Remote keyless entry system

CAUTION
Do not expose the transmitter to
severe shocks, such as those
experienced as a result of drop-
ping or throwing.
Do not take the transmitter apart
except when replacing the bat-
tery.
Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.
This device complies with Part 15 of
the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions: (1) This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received, in-
cluding interference that may cause
undesired operation.
Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the
user's authority to operate the equip-
ment.
The transmitter for the remote keyless
entry system is located inside the key
head.
The remote keyless entry system has the
following functions.
Locking and unlocking the doors and
rear gate without a key
Unlocking the rear gate without key
Sounding a panic alarm
Arming and disarming the alarm sys-
tem. Refer to the next section "Alarm
system" for detailed information.
The operable distance of the remote
keyless entry system is approximately 30
feet (10 meters). However, this distance
will vary depending on environmental
conditions.
The system's operable distance will be
shorter in areas near a facility or electronic
equipment emitting strong radio waves
such as a power plant, broadcast station,
TV tower, or remote controller of home
electronic appliances.
NOTE
The remote keyless entry system does
not operate when the ignition key is
inserted in the ignition switch or when
any of the doors or the rear gate is not
fully closed.
: Rear gate unlock button
: Unlock/disarm button
: Lock/arm button
A: Panic button