High Mount Stop Light - Subaru 2005 Impreza Owner's Manual

High mount stop light

Sedan
1. Remove the high mount stop light cover by prying
the edge with a screwdriver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
Wagon
1. Remove the mounting screw covers by prying the
UGB546BA
edge with a screwdriver.
2. Remove the mounting screws using a Phillips
screwdriver and then remove the high mount stop light
cover.
3. Remove the bulbs from the socket by pushing it
and turning counterclockwise. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the cov-
ers.
NOTE
Other bulbs may be difficult to replace. Have your
Maintenance and service
HSB091BA
– CONTINUED –
11-83