Table of Contents
Advertisement
suit driving and road-surface conditions. When the ig-
nition switch is turned ON, the "AUTO" indicator light
in the combination meter comes on. The system can
be switched to a manual mode.
Manual mode
The manual mode allows the driver to set the differen-
tial-action limiting factor of the center differential as
desired to suit driving and road-surface conditions.
When this mode is selected, the "AUTO" indicator light
in the combination meter goes off.
Manual switch
Press the "DCCD-MANU" switch on the center con-
sole to switch from auto mode to manual mode. The
"AUTO" indicator light in the combination meter will go
off. Press the switch again to go back to auto mode.
The "AUTO" indicator light in the combination meter
will come on.
Center differential control dial and indicator
light
The control dial is located beside the parking-brake le-
ver. By turning the control dial forward and rearward,
it is possible to change the differential-action limiting
factor of the center differential.
The center-differential indicator lights in the combina-
UG7037BA
tion meter give six levels of indication. The indicator
Starting and operating
UG7034BA
– CONTINUED –
7-19
Advertisement
Chapters
Table of Contents
