Table of Contents
Advertisement
Hazard warning flasher
The hazard warning flasher is used to warn other driv-
ers when you have to park your vehicle under emer-
gency conditions. The hazard warning flasher works
with the ignition switch in any position.
To turn on the hazard warning flasher, push the haz-
ard warning button on the instrument panel. To turn off
the flasher, push the button again.
NOTE
When the hazard warning flasher is on, the turn
signals do not work.
Meters and gauges (WRX-STi)
Combination meter illumination
When the ignition switch is turned to the "ON" position,
the various parts of the combination meter are illumi-
nated in the following sequence:
1. Meter needles and gauge needles light up.
2. Meter needles and gauge needles each show MAX
position.
3. Meter needles and gauge needles each show MIN
position, and REV indicator flashes.
4. Dials and indicators in meters and gauges light up.
5. "STi" mark lights up.
6. Regular illumination (for driving) begins.
HS3019BA
Cancelling sequential illumination of
the combination meter
With the ignition switch in the "ON" position, it is pos-
sible to cancel sequential illumination of the combina-
tion meter.
Press the trip knob while turning the REV setting knob
clockwise or counterclockwise. The buzzer will sound
briefly, and the outside temperature indicator will show
"ON" or "– –".
ON : sequential illumination
Instruments and controls
– CONTINUED –
3-7
Advertisement
Chapters
Table of Contents
