Siterwell GS522C User Manual

SMOKE ALARM USER MANUAL
PHOTOELECTRIC MINI SMOKE ALARM GS522C

PRODUCT SPECIFICATIONS:

Power: built-in DC3V lithium battery
Operation Current: <8uA(standby), <70mA (alarm)
Sensor Type:
Photoelectric
Alarm Volume:
>85dB(A) at 3 meters

OPERATION

Testing :alarm is powered on by mounting the bracket, Test the unit weekly to ensure proper operation by pressing
the test button. this will sound the alarm if the electronic circuitry, horn, and battery are working properly. If no alarm
sounds, the battery may be depleted.
DO NOT use an open flame to test your alarm, you could damage the alarm or ignite combustible materials and start
a structure fire.
CAUTION: Due to the loudness (85 decibels) of the alarm, Always stand an arms-length away from the unit when
testing. Test the alarm weekly to ensure proper operation. Erratic or low sound coming from your alarm may indicate
a defective alarm.
NOTE: WEEKLY TESTING IS REQUIRED
LED indicators : This smoke alarm is equipped with red LED indicators.
Standby Condition: The red LED will flash every 40 seconds to indicate that the smoke alarm is operating properly.
Alarm Condition: When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly
(one flash per second).The rapid flashing LED and pulsating alarm will continue until the air is cleared or the test
button is released.
GS522C
Low battery warning:
Avertissement de batterie faible:
Alarm Sensitivity:
Comply With:
Yes
Yes | Hush time : 10 hours
1.46-2.46%/ft OB
UL217 &CAN/ULC-S531