Siterwell GS592 User Manual

Smoke and Heat Alarm User Manual
Model number:GS592
Thank you for purchasing our smoke
detection. Please take a few minutes to read the user's . Please take a few minutes to read the user's
manual thoroughly and familiarize yourself and your family familiarize yourself and your family
with its operation. And save it for future reference. with its operation. And save it for future reference.
Diagram 1
Product Specifications:
Power: built-in DC3V(CR123A)Lithium battery

(battery not replaceable).
Operation current :<6uA(Standby), <7

Alarm volume : >85dB(A) at 3 meters.

Smoke sensitivity :0.094-0.154dB/m.

Heat sensitivity: 54-70℃.

Silence time: approx. 10 minutes.

Local smoke alarm sound pattern:

BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s
pause 1.5s, with the red LED flash
alarm pattern.
Local heat alarm sound pattern:

BI 0.3s - pause 0.1s, with the red
repeat this alarm pattern.
Comply with standard:EN14604:2005/AC:2008

Description:
The unit is a photoelectric 3V DC smoke and heat
photoelectric technology, it is more sensitive in detecting photoelectric technology, it is more sensitive in detecting
slow smoldering fires which generate light smoke, little heat slow smoldering fires which generate light smoke, little heat
and may smolder for hours before bursting into flames. This and may smolder for hours before bursting into flames. This
smoke alarm does not contain any radioactive material. not contain any radioactive material.
Smoke alarms should be installed in every room (except the hould be installed in every room (except the
Document NO.: RD-592-39-001
Alarm User Manual
Ref：ST592
alarm and heat
0905
EN14604:2005/AC:2008B EN14604:2005/AC:2008B
S 5446-2:2003 2:2003
Lithium battery
75mA(alarm).
pause 0.5s – BI 0.5s –
LED flashing, repeat this
the red LED flashing,
EN14604:2005/AC:2008
BS5446-2:2003. 2:2003.
and heat alarm. The
bathroom and kitchen),finished attics and basements, making
sure the people in the home will be able to hear and respond sure the people in the home will be able to hear and respond
to the alarm sound. For minimum protection, you should
install an alarm on every level of th on every level of the home particularly
outside sleeping rooms. Each alarm should be placed in the
middle of the ceiling of each room to be protected. middle of the ceiling of each room to be protected. Typical
single storey dwelling installation recommendations: Install a single storey dwelling installation recommendations: Install a
smoke alarm on the ceiling inside each bedroom and in smoke alarm on the ceiling inside each bedroom and in the
hallway outside each separate sleeping area. If a bedroom hallway outside each separate sleeping area. If a bedroom
area. hallway is more than 30 feet long, install a smoke alarm hallway is more than 30 feet long, install a smoke alarm
at each end. If there is a basement: install a smoke alarm on at each end. If there is a basement: install a smoke alarm on
18
the basement ceiling at the bottom of the stairwell the basement ceiling at the bottom of the stairwell. Typical
multi-storey dwelling installation recommendations: orey dwelling installation recommendations: Install a
minimum of one smoke alarm on each minimum of one smoke alarm on each occupiable level of the
home. Install a smoke alarm on the ceiling inside each Install a smoke alarm on the ceiling inside each
bedroom and in the hallway outside each separate sleeping bedroom and in the hallway outside each separate sleeping
area. If a bedroom area hallway area. If a bedroom area hallway is more than 30 feet long,
install a smoke alarm at each end install a smoke alarm at the install a smoke alarm at each end install a smoke alarm at the
top of a first – to- second floor stairwell. second floor stairwell.
Important Safety Information: Important Safety Information:
The test button accurately tests smoke alarm functions. Do he test button accurately tests smoke alarm functions. Do
1.
not use any other test method. Test smoke alarm weekly to not use any other test method.
ensure proper operation.
Please check the alarm on reoccupation of the premises
2.
after a vacation.
If you're sure it isn't a really alarm, open windows or fan t isn't a really alarm, open windows or fan
3.
the air around smoke alarm to test and silence it. the air around smoke alarm to
User to install this product needs to comply with all local
4.
and national electrical installation and building codes. and national electrical installation and building codes.
This smoke alarm is designed to be used inside a single This smoke alarm is designed to be used inside a single
5.
family home only. In multifamily buildings, each home only. In multifamily buildings, each
individual living unit should have its own smoke alarms. individual living unit should have its own smoke alarms.
Do not install in non-residential buildings as this smoke
alarm is not a substitute for a complete alarm system. alarm is not a substitute for a complete alarm system.
Install a smoke alarm in every room and on every level of Install a smoke alarm in every room and on every level of
6.
the home. Smoke may not reach the smoke alarm for many the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the reasons. For example, if a fi
home, on another level, in a chimney, wall, roof, or on the home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke other side of a closed door, smoke may not reach the smoke
alarm in time to alert household members. A smoke alarm alarm in time to alert household members. A smoke alarm
will not promptly detect a fire except in the area or room in will not promptly detect a fire except in the a
which it is installed.
Smoke alarm may not alert every household member every Smoke alarm may not alert every household member every
7.
time. The alarm horn is loud in order to alert individuals to time. The alarm horn is loud in order to alert individuals to
a potential danger. However, there may be some a potential danger. However, there may be some
- 1 -
finished attics and basements, making
For minimum protection, you should
ach alarm should be placed in the
on reoccupation of the premises
product needs to comply with all local
residential buildings as this smoke
Version: G Version: