Subaru 2001 Legacy Owner's Manual page 76

B Maintenance
CAUTION
D Keep the belts free of polishes, oils, chemicals and particularly
battery acid as they may weaken the belts.
D Never attempt to make modifications or changes that will pre-
vent the built-in child restraint from operating properly.
The built-in child restraint may be cleaned with mild soap and luke-
warm water. Do not use household cleaners. They may weaken the
belts or damage plastic parts.
Keep the built-in child restraint belts clean and dry. Clean the belts
with only a mild soap and lukewarm water. Never bleach or dye the
belts because this could seriously affect their strength.
The removable pad is attached to the child restraint cushion and seat-
back with hook and loop fasteners (VelcroR). It is possible to remove
the pad, hand wash it in cold water and dry it in the shade. Never
bleach or iron the pad.
Periodically inspect the belts, tongue plates, buckle, clip, retractor
and anchorages of the built-in child restraint. If these parts are dam-
aged and/or do not function properly, contact your authorized
SUBARU dealer for replacement parts.
Seat, seatbelt and SRS airbags
– CONTINUED –
1-53