Outside Mirrors - Subaru 2001 Legacy Owner's Manual

n Compass zone adjustment
1. The zone setting is factory preset to Zone 8. Refer to the "Com-
pass calibration zone" map shown above or one attached to the end
of this manual to verify that the compass zone setting is correct for
your geographical location.
2. Press and hold the right button for 3 seconds then release, and the
word "ZONE" will briefly appear and then the zone number will be dis-
played.
3. Press the right hand button repeatedly to cycle the display through
all possible zone settings. Stop cycling when the correct zone setting
for your location is displayed.
4. Releasing the button for 3 seconds will exit the zone setting mode.
J Outside mirrors
B Convex mirror (Passenger side)
WARNING
Objects look smaller in a convex mirror and farther away than
when viewed in a flat mirror. Do not use the convex mirror to
judge the distance of vehicles behind you when changing lanes.
Use the inside mirror (or glance backwards) to determine the
actual size and distance of objects that you view in convex mir-
ror.
3-34
HB6021AB