Subaru 2001 Legacy Owner's Manual page 181

With the fan speed control switch in the AUTO position, the fan speed
changes automatically corresponding to various conditions: air tem-
perature inside and outside of the passenger compartment, intensity
of the sunlight, etc.
Use this switch to select desired fan speed. Fan speed increases with
each press of the switch and returns to the AUTO position.
n A/C — Air conditioner switch
NOTE
The air conditioner compressor does not operate when the out-
side air temperature is below 32 F (0 C).
If the windshield starts to fog when the air conditioner is operated in
the AUTO mode, push the air conditioner switch "A/C" to defog and
dehumidify.
When this switch is pushed, the air conditioner compressor turns on
and the indicator light "A/C" on the control panel comes on. After
eliminating the fogging from the windshield, set the air conditioner
back in the AUTO mode by pushing the "AUTO" switch.
n MODE — Air flow control switch
(Ventilation) : Air flows through the instrument panel outlets.
(Bi-level) :
(Heat) :
(Heat-def) :
Air flows through the instrument panel outlets
and the foot outlets.
Air flows through the foot outlets and some
through the windshield defroster outlets.
Air flows through the windshield defroster out-
lets and foot outlet.
Climate control
– CONTINUED –
4-15