Servicing The Appliance - Hoover H84-7WD-ZA Instructions And Warranty

you place it back into the dust filter. Do not dry it with hot air.
3. Place the dust filter (9) back into the dirt container (0). Ensure that the dust filter
(9) is seated squarely and that the rubber lip seals the dirt container (0).
4. Place the dirt container (0), back onto the motor block:
• Push the plastic nose on the underside of the hand vacuum cleaner into the recess
on the dirt container (0).
• Press the unlock button (8) and, at the same time, slide the dirt container (0) onto
the motor block.
• Release the lock button (8), so that the restraint grips into the recess. The dirt
container (0), now sits firmly on the motor block.
5. Clean the housing and both nozzles with a lightly moistened cloth. For stubborn
soiling use a mild detergent on the cloth.
6. Dry all parts thoroughly before reusing the appliance or putting it into storage.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating correctly,
please check the following:
● You have followed the instructions correctly
● That the wall socket is switched on.
● That the mains power supply is ON.
● That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:
● The unit is packed carefully back into its original packaging.
● Proof of purchase is attached.
● A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, to avoid any hazard. If service becomes necessary within the warranty period,
the appliance should be returned to an approved Home of Living Brands (Pty) Limited
service centre. Servicing outside the warranty period is still available, but will, however, be
chargeable.