Overview; Safety Notices; Important - IBM Power775 Service Procedure

Uepo cable service procedure

Hide thumbs Also See for Power775:

Table of Contents

2 OVERVIEW

This section is an overview only. Do not start the service procedure until Section 3 which contains the detailed steps.

2.1

2.1.1

Read "Safety_Notices_G229-9054.pdf " available from InfoCenter – see Section 1.2. The following are some

of the cautions that specifically pertain to this Power775 service procedure.

CAUTION:

Energy hazard present. Shorting might result in system outage and possible physical injury. Remove all

metallic jewelry before servicing. (C001)

CAUTION:

The doors and covers to the product are to be closed at all times except for service by trained service

personnel. All covers must be replaced and doors locked at the conclusion of the service operation.

(C013)

CAUTION:

Servicing of this product or unit is to be performed by trained service personnel only. (C032)

2.1.2

IMPORTANT

Here is a danger that specifically pertains to this Power775 service procedure.

DANGER:

Hazardous voltage present. Voltages present constitute a shock hazard, which can cause severe injury

or death. (L004)

Figure 1 Hazardous Voltage, Current, or Energy

Power775 UEPO Cable Service Procedure

PN: 41U8503, EC N44172

6 of 32

Table of Contents