High/Low Beam; Headlight Flasher - Saab 2005 9-3 Owner's Manual

Dipswitch

1 Headlight flasher

2 High/low beam

High/low beam
To switch between high and low beam, pull
the control stalk all the way towards the
steering wheel. (Headlight switch must be
ON.)
The symbol on the main instrument
panel shows when the high beam is on.
Headlight flasher
To flash your headlights, pull the control
stalk half-way towards the steering wheel.
The high beam will remain on until you
release the stalk.
Courtesy Headlamp Feature
A delay function allows the low beam head-
lights and back-up lights to remain on for
about 30 seconds after the driver's door has
been closed.
To activate this function:
1 After turning off the engine, remove the
remote control.
2 Open the driver's door.
3 Pull the control stalk all the way towards
the steering wheel.
The low beam headlights and reversing
lights will come on and remain on for
30 seconds when the door is closed.
Instruments and controls
Adjusting instrument illumination
Instrument lighting
The brightness of the instrument lighting
can be adjusted by pressing the button (+ or
- signs on the button above the NIGHT-
PANEL button).
97