Saab 2003 9-5 2.3 Turbo Ecopower Owner's Manual page 218

Table of Contents

Advertisement

218
Car care and technical information
Catch seen from engine bay, left-hand
side
Catch seen from engine bay, right-hand
side
Front turn signal bulbs
To change the bulb, the complete lamp unit
has to be removed.
1 Depress the catch, accessed from the
engine bay.
2 Carefully pull out the lamp unit.
3 The bulb holder has a bayonet fitting.
Grip the holder and twist it counterclock-
wise.
4 Withdraw the bulb holder from the lamp
unit.
5 The bulb also has a bayonet fitting.
Press in the bulb and twist it counter-
clockwise.
6 Fit the new bulb and check that it is cor-
rectly seated.
2
1
Front turn signal bulb
1 Catch
2 Bayonet pin
3 Plastic lugs
To re-install the lamp unit
1 Align the catch with the recess in the
lamp housing holder.
2 Press the lamp housing towards the
headlight slightly and press the housing
towards the rear of the car.
3 Make sure the locating pin and the two
plastic lugs enter their respective holes.
4 Press the lamp housing until it click into
place.
3
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

2003 9-5 2.3t ecopower2003 9-5 3.0t v6 ecopower

Table of Contents