Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high,
push the turn signal lever away from you. To change
from high beam to low beam, pull the turn signal
lever towards you. To flash the high beams from low
beam, pull the turn signal lever all the way towards you.
Then release it.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To flash the high beams from low beam, pull the turn
signal/multifunction lever all the way towards you.
Then release it.
3-8
When the high beams
are on, this light on the
instrument panel cluster
will also be on.
Windshield Wipers
The windshield wiper lever is located on the right side of
the steering column.
Move the lever to the following positions:
1
(High Speed): For steady wiping at high speed.
6
(Low Speed): For steady wiping at low speed.
&
(Delay): Sets a delay between wipes.