Removing the Spare Tire and Tools
If your vehicle has the rear compartment storage
panel/cover, you will have to remove it to access the
load floor. See Rear Compartment Storage Panel/Cover
on page 2-44 for more information.
To access the spare tire and tools:
1. Lift the load floor up and pull it out of the vehicle
and set it aside.
5-72
2. Remove the nut retaining the spare tire.
3. Remove the compact spare tire. See Compact
Spare Tire on page 5-81 for more information.
4. Locate the jack and wheel wrench, which are
located on the driver's side of the rear cargo
area, behind an access door. Pull out the access
door to reach them.